Anderson Asphalt of Sand Creek, WI
Phone: 715-658-1628
Toll-free: 800-776-3267
Sand Creek, Wisconsin
Home About Us Services Compare Us Why Seal? Special Deals!
Professional People, Professional Equipment
Professional Results!
Products and Methods Used by Anderson Asphalt

      CRACKSEALING

          Cracks properly sealed keep water out of the base beneath the blacktop and prevent the base from settling and moving from freeze thaw cycles. This is what creates potholes. Proper cracksealing requires that the cracks are routered out to the proper width providing a reservoir of rubber cracksealer that will keep the crack sealed as the surface expands and contracts. The crack then is blown clean and hot rubber cracksealer meeting ASTM D 3405 specification is applied. If cracks are not routered or cold poured crack sealer is used the cracks will not stay sealed.

ALL CRACKS WE ROUT AND SEAL ARE GUARANTEED NOT TO REOPEN FOR 3 YEARS OR THEY WILL BE RESEALED AT NO CHARGE.


      SEALCOATING

          Proper preparation and materials are the key to good looking, long lasting sealcoating. Before we apply sealer the cracks must be sealed and the surface cleaned. Grass is trimmed back from the edges, oil drip spots and problem areas are scrubbed and primed as necessary. Amnguard PLUS sealer formulated and mixed in our own exclusive blend is then applied. On edges and in areas where spray drift may be a problem we apply the sealer by hand with squeegees or brushes. Larger areas are sprayed. On parking lots and high traffic drives we always apply TWO COATS of sealer. First coat is applied and allowed to dry, and then a second coat in applied, generally on the same day. TWO COATS OF SEALER PROVIDE TWICE THE WEAR for a relatively small increase in cost.

          Our Amquard PLUS sealer starts as a polymerized blend of coal tar and asphalt emulsion meeting Federal specification RP 355e. We then mix this sealer with silica sand and other additives in a proprietary blend to give you a deep black, nonskid, long-lasting sealcoat. NO ONE ELSE IN NORTHWEST WISCONSIN USES THIS SEALER BLEND AND, TO OUR KNOWLEDGE, NO ONE ELSE APPLIES TWO COATS OF SEALER ON ALL COMMERCIAL LOTS.

      LINE PAINTING

          After cracksealing and sealcoating lines, arrows and handicapped symbols are reapplied using Sherwin Williams traffic paint. We also design, layout and paint lines on newly paved lots. We can layout traffic markings to get the best use of your space while maintaining safe and easy traffic flow.